CPU Utilization at 100% When Monitoring 4 Cameras
-
Hi,
I have a problem by the Security Monitor Pro 2.2
The cpu is working by 100% when monitoring . I have 4 IP digicam on this pc.
The pc hardware is:
CPU P3 /1000
SDram 512The other pc is
P4 2600
DDR 1GBThe cpu is working 100% when monitoring
There is a solution?
Sorry for my English
Sincerely
T.Stender
-
You can reduce CPU load by decreasing the frame rate for your cameras. Click on the Settings button for each camera (the button farthest to the right on the camera window). Switch to the IP Cameras tab, and use the drop-down list to choose 1 frame per second.
A Pentium 3-based computer may be overtaxed when monitoring 4 cameras simultaneously. The Pentium 4 system should monitor all four without being overloaded.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login